Whatman Polycap AS

Description

First layer (GMF) acts as a prefilter to ensure longer membrane (0.2, 0.45, and 1.0 µm) life and higher filtration efficiency.
Nylon membrane filter layer is inherently hydrophilic, has low extractables, is biosafe, and has excellent flow rates
Polypropylene housing is thermally fused (no glues, adhesives, or extraneous materials), reducing extractable levels
Can be tested with bubble point, pressure decay, or forward flow methods
Available in presterilized and nonsterile (autoclavable) versions
Manufactured according to ISO9001:2008 QMS standards

Whatman capsule filters from GE Healthcare’s Life Sciences business are available for a variety of applications.

Polycap AS for aqueous solutions

Polycap AS are Whatman capsule filters specifically designed for high-volume filtration of aqueous sample solutions in a compact size. With a nylon membrane filter and GMF prefilter, these filters have a long usable life.

Parameter	Polycap AS Capsule Filter, 0.2 µm, FNPT inlet and outlet
Inlet Connector :	Female national pipe thread (FNPT)
Outlet Connector:	Female national pipe thread (FNPT)
Housing :	Polypropylene (PP)
Operating pressure max. :	4.1 bar (60 psi)
Vent :	On inlet
Prefilter :	Glass microfiber double laminated with polyolefin monofilament non-woven
Endotoxin Level:	LAL tested, ≤0.5 EU/ml
Sterilization:	Certain filter devices have been sterilized.Capsules may be autoclaved at 121°C for 20 minutes. However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable.
Sealing:	Heat-fused
Support System:	Polypropylene (PP)
Dimensions:	36 mm, 75 mm
Pore Size:	0.2 µm
Product Name:	Polycap AS 36 Capsule Filter, 0.2 µm, FNPT inlet and outlet (5 pcs) Polycap AS 75 Capsule Filter, 0.2 µm, FNPT inlet and outlet (5 pcs)

Parameter	Polycap AS Capsule Filter, sterile, 0.2 µm, SB inlet and outlet/ 1/2 SB inlet and outlet/ SB inlet and outlet plus filling bell /MNPT inlet and SB outlet
Housing:	Polypropylene (PP)
Sterile:	Yes
Operating pressure max.:	4.1 bar (60 psi)
Vent:	On inlet
Prefilter:	Glass microfiber double laminated with polyolefin monofilament non-woven
Endotoxin Level:	LAL tested, ≤0.5 EU/ml
Sterilization:	Certain filter devices have been sterilized.Capsules may be autoclaved at 121°C for 20 minutes. However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable.
Sealing:	Heat-fused
Support System:	Polypropylene (PP)
Dimensions:	36 mm
Pore Size:	0.2 µm
Product Name:	Polycap AS 36 Capsule Filter, sterile, 0.2 µm, SB inlet and outlet (1 pc) Polycap AS 36 Capsule Filter, sterile, 0.2 µm, 1/2 SB inlet and outlet (1 pc) Polycap AS 36 Capsule Filter, sterile, 0.2 µm, SB inlet and outlet plus filling bell (1 pc) Polycap AS 36 Capsule Filter, sterile, 0.2 µm, MNPT inlet and SB outlet (1 pc)

Parameter	Polycap AS Capsule Filter, sterile, 0.45 µm, SB inlet and outlet
Housing:	Polypropylene (PP)
Sterile:	Yes
Operating pressure max.:	4.1 bar (60 psi)
Vent :	On inlet
Prefilter :	Glass microfiber double laminated with polyolefin monofilament non-woven
Endotoxin Level:	LAL tested, ≤0.5 EU/ml
Sterilization :	Certain filter devices have been sterilized.Capsules may be autoclaved at 121°C for 20 minutes. However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable.
Sealing :	Heat-fused
Support System:	Polypropylene (PP)
Dimensions :	36 mm, 75 mm,
Pore Size:	0.45 µm
Product Name :	Polycap AS 36 Capsule Filter, sterile, 0.45 µm, SB inlet and outlet (1 pc) Polycap AS 75 Capsule Filter, sterile, 0.45 µm, SB inlet and outlet (5 pcs)