Description
Control of Standard Components
ControlCOCKPIT | adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
---|---|
Temperature | 1 Pt100 sensor DIN class A in 4-wire-circuit |
Timer | Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
Temperature
Set temperature range in °C | min.10°C above ambient up to +300°C |
---|---|
resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED) |
Control Technology
adjustable parameters | temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime |
---|---|
Function SetpointWAIT | the process time does not start until the set temperature is reached |
Language setting | German/English/Spanish/French |
Calibration | three freely selectable temperature values |
Ventilation
Fan | forced air circulation by quiet air turbine, adjustable in 10 % steps |
---|---|
Fresh air admixture | adjustment of pre-heated fresh air admixture by air flap control in 10 % steps |
Vent | vent connection with restrictor flap |
Communication
Programming | AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand). |
---|---|
Documentation | programme stored in case of power failure |
Safety
Temperature control | adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
---|---|
Autodiagnostic system | for fault analysis |
Standard Equipment
Door | fully insulated stainless steel door with 2-point locking (compression door lock) |
---|---|
Internals | 2 stainless steel grids |
Scope of delivery | incl. works calibration certificate for +160°C |
Housing | rear zinc-plated steel |
Interior | easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides |
Stainless Steel Interior
w(A) x h(B) x d(C): 640 x 800 x 500 mm | |
Volume 256 l | |
Max. loading of chamber: 300 kg |
Textured Stainless Steel Casing
w(D) x h(E) x d(F): 824 x 1183 x 684 mm |
Electrical Data
230 V, 50/60 Hz / approx. 3400 W | |
115 V, 50/60 Hz / approx. 2200 W |
Packing/Shipping Data
the appliances must be transported upright | |
---|---|
Customs tariff number | 8419 8998 |
Country of origin | Federal Republic of Germany |
WEEE-Reg.-No. | DE 66812464 |
Dimensions approx incl. carton B x H x T: 930 x 1380 x 930 mm | |
Net weight approx. 110 kg | |
Gross weight carton approx. 161 kg |