Portable pH/EC/TDS Meter
HI9810-6
Description
The HI9810-6 is an economical, wateproof, portable meter that measures pH, conductivity (EC), and total dissolved solids (TDS) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9810-6 is most suitable for agricultural, greenhouse and hydroponic applications.
• 3-in-1 combination probe with pH, EC/TDS, and temperature sensors
• Best for hydroponics, greenhouses, farming and ground water applications.
• CaAL Check feature to easily check the probe calibration status at any time.
Features at-a-glance :
• Automatic Temperature Compensation – EC and TDS readings are compensated for variations in temperature
• Low Battery Indicator
• Set EC to TDS conversion factor – EC to TDS conversion factor set at 0.5 so no need for additional calculations
SPECIFICATIONS – pH
pH Range : | 0 to 14 pH |
---|---|
pH Resolution : | 0.1 pH |
pH Accuracy (@25ºC/77ºF) : | ±0.1 pH |
pH Calibration : | Manual 1 point through offset trimmer |
SPECIFICATIONS – EC/TDS
EC Range : | 0 to 6000 µS/cm |
---|---|
EC Resolution : | 10 µS/cm |
EC Accuracy : | ±2% F.S. |
EC Calibration : | manual, one-point |
TDS Range : | 0 to 3000 mg/L |
TDS Resolution : | 10 mg/L |
TDS Accuracy : | ±2% F.S. |
EC/TDS Temperature Compensation : | automatic, 0 to 50°C (32 to 122°F) Compensation with a ß of 2%/°C |
Temperature Correction Coefficient : | β = 2% /°C |
EC to TDS Conversion Factor : | 1 µS/cm = 0.5 mg/L |
SPECIFICATIONS – General Meter
EC/TDS Probe : | HI1285 combination, amplified, double-junction, gel pH electrode with incorporated EC/TDS probe and built-in temperature sensor and 1m (3.3′) cable |
---|---|
Battery Type / Life : | 9V / approximately 150 hours of continuous use |
Environment : | 0 to 50°C (32 to 122°F); max 95% RH non-condensing |
Dimensions : | 185 x 82 x 45 mm (7.3 x 3.2 x 1.8″) |
Weight : | 520 g (1.1 lb.) |
Ordering Information : | HI9810-6 is supplied with HI1285-6, pH/EC/TDS/°C combination probe with Cal-Check and 8 pin DIN connector and 1 m (3.3′) cable,
HI70007 (1), HI 70031 (1), HI70032 (1), HI700661 (2), HI50021 check solution sachet (2), Instruction manual and 9V alkaline battery (1). |
Warranty : | 2 years (probe 6 months) |
Order now
To make your order, please contact us at info@polyscientific.com.my or call us at +6 06 3350 690