A retort can be used for various heat treating processes requiring a controlled inert or reactive atmosphere, e. g. to prevent oxidisation or to enhance surface hardness.
Atmosphere Retorts
Description
The A105 retort, which incorporates a silicone rubber seal, can achieve lower oxygen levels than the A107 retort which uses a sand seal. Maximum temperature 1100°C.
• The A105 NiCr alloy (Inconel) retort is sealed by a removable front opening insulated door fitted with a silicone rubber seal.
• Gas inlet and outlet connections are easily accessible at the front.
• Oxygen levels down to 30 ppm are achievable.
• Retorts for CWF furnaces are fitted with a 3 mm thermocouple gland through the centre of the door.
• Retorts for GPC furnaces are fitted with a 3 mm thermocouple gland through the rear of the retort.
• The retort and furnace must be ordered together as the furnace is modified to allow it to be used with, and without, the retort.
• The A107 NiCr alloy (Inconel) retort with a shallow removable lid locates into a sand seal on top of a deep base.
• Can be used for annealing and pack carburising.
• Front mounted gas inlet/outlet connections extend through slots in the furnace door.
• The retort and furnace must be ordered together as the furnace is modified to allow it to be used with, and without, the retort.
Order now
To make your order, please contact us at info@polyscientific.com.my or call us at +6 06 3350 690
