HEPA-CAP Vent Filters from GE Healthcare use high-efficient glass fiber filter media, pleated to maximize surface area for high particle retention and high flow rate. The filters are available in three different sizes and with different end fittings to meet the requirements of your application.
Whatman HEPA-Cap Vent Filters
Description
- Glass filter media is strengthened by dual lamination with a tough polyester monofilament
- Typical retention efficiency of 99.97% of all particles ≥ 0.3 µm in air
- Depth filter design allows for high loading capacity and bidirectional flow
- Appropriate for tissue culture applications
| Parameter | HEPA-CAP, inlet 3/8“ FNPT, outlet 3/8“ FNPT |
|---|---|
| Housing : | Polypropylene (PP) |
| Operating pressure max. : | 4.1 bar (60 psi) |
| Filter Media : | Laminated hydrophobically treated glass microfiber |
| Flow Direction : | Bidirectional |
| Sterilization : | Autoclavable |
| Sealing : | Heat-fused |
| Support System : | Polypropylene (PP) |
| Dimensions & Pack Size : | 36 mm (5 pcs), 150 mm (1 pc /5 pcs), 75 mm |
| Parameter | HEPA-CAP, inlet 1/4 to 3/8“ stepped barb, outlet 1/4 to 3/8” stepped barb |
|---|---|
| Housing : | Polypropylene (PP) |
| Operating pressure max. : | 4.1 bar (60 psi) |
| Filter Media : | Laminated hydrophobically treated glass microfiber |
| Flow Direction : | Bidirectional |
| Sterilization : | Autoclavable |
| Sealing : | Heat-fused |
| Support System : | Polypropylene (PP) |
| Dimensions : | 36 mm |
| Pack Size : | 1 Piece |
| Parameter | HEPA-CAP, inlet 3/8 to 1/2“ stepped barb, outlet 3/8 to ½” stepped barb |
|---|---|
| Housing : | Polypropylene (PP) |
| Operating pressure max. : | 4.1 bar (60 psi) |
| Filter Media : | Laminated hydrophobically treated glass microfiber |
| Flow Direction : | Bidirectional |
| Sterilization : | Autoclavable |
| Sealing : | Heat-fused |
| Support System : | Polypropylene (PP) |
| Dimensions : | 75 mm |
Order now
To make your order, please contact us at info@polyscientific.com.my or call us at +6 06 3350 690
