HI9810-6

Portable pH/EC/TDS Meter

Description

The HI9810-6 is an economical, wateproof, portable meter that measures pH, conductivity (EC), and total dissolved solids (TDS) with a single probe. The meter operation is simplified with dedicated buttons for measurement modes to be be displayed on the LCD and knobs for single point calibration of pH and EC/TDS. The HI9810-6 is most suitable for agricultural, greenhouse and hydroponic applications.

•  3-in-1 combination probe with pH, EC/TDS, and temperature sensors
•  Best for hydroponics, greenhouses, farming and ground water applications.
•  CaAL Check feature to easily check the probe calibration status at any time.

Features at-a-glance :
•  Automatic Temperature Compensation – EC and TDS readings are compensated for variations in temperature
•  Low Battery Indicator
•  Set EC to TDS conversion factor – EC to TDS conversion factor set at 0.5 so no need for additional calculations

  SPECIFICATIONS – pH

 pH Range                          : 0 to 14 pH
 pH Resolution                    : 0.1 pH
 pH Accuracy (@25ºC/77ºF) : ±0.1 pH
 pH Calibration                   : Manual 1 point through offset trimmer

 SPECIFICATIONS – EC/TDS

 EC Range                                          : 0 to 6000 µS/cm
 EC Resolution                                    : 10 µS/cm
 EC Accuracy                                      : ±2% F.S.
 EC Calibration                                   : manual, one-point
 TDS Range                                        : 0 to 3000 mg/L
 TDS Resolution                                  : 10 mg/L
 TDS Accuracy                                    : ±2% F.S.
 EC/TDS Temperature Compensation  : automatic, 0 to 50°C (32 to 122°F) Compensation with a ß of 2%/°C
 Temperature Correction Coefficient   : β = 2% /°C
 EC to TDS Conversion Factor            : 1 µS/cm = 0.5 mg/L

  SPECIFICATIONS – General Meter

 EC/TDS Probe          : HI1285 combination, amplified, double-junction, gel pH electrode with incorporated EC/TDS probe and built-in temperature sensor and 1m (3.3′) cable
 Battery Type / Life  : 9V / approximately 150 hours of continuous use
 Environment             : 0 to 50°C (32 to 122°F); max 95% RH non-condensing
 Dimensions               : 185 x 82 x 45 mm (7.3 x 3.2 x 1.8″)
 Weight                        : 520 g (1.1 lb.)
 Ordering Information : HI9810-6 is supplied with HI1285-6, pH/EC/TDS/°C combination probe with Cal-Check and 8 pin DIN connector and 1 m (3.3′) cable,

HI70007 (1), HI 70031 (1), HI70032 (1), HI700661 (2), HI50021 check solution sachet (2), Instruction manual and 9V alkaline battery (1).

 Warranty                    : 2 years (probe 6 months)

Order now

To make your order, please contact us at  info@polyscientific.com.my or call us at +6 06 3350 690

Go to Top