HI8033

Description

The HI8033 is a durable, portable EC/TDS meter designed for use in a wide variety of applications. It is supplied with a four-ring conductivity probe to allow for three ranges of EC measurement and one range of TDS measurement. The temperature compensation coefficient (β) is fixed at 2%/°C and all conductivity readings are manually adjusted for temperature, assuring users of consistent and accurate measurements.

•  Four-ring probe
•  Manual Temperature Compensation
•  Three measuring ranges

The portable HI8033 EC/TDS meter is suitable for use in a variety of applications. It offers three EC measurement ranges from 0.0 µS/cm to 19.99 mS/cm and a TDS measurement range from 0 to 19990 mg/L (ppm) with a ±1% FS accuracy. The HI76301W four-ring conductivity probe that is supplied with the meter allows for a wide range of measurements with a single sensor. The four-ring technology also eliminates the polarization effect that is common with standard two pole versions. The HI8033 offers manual temperature compensation from 0 to 50°C (32 to 122°F) and a fixed β at 2%/°C.

  Features/Benefits:
Fixed Temperature Coefficient
•  As the temperature of a solution increases or decreases, the conductance becomes higher or lower, respectively.
•  The temperature compensation coefficient, also known as β, is the factor that adjusts for the temperature of a solution to ensure an accurate reading is achieved.
•  The HI8033 is programmed with a fixed β at 2%/°C; this factor corrects the conductivity reading by 2% for each degree Celsius change in the sample.

  Four-ring Probe
•  The HI76301W four-ring probe that comes with the HI8033 offers a versatile and accurate solution for conductivity readings.
•  Four-ring technology allows for a larger range of measurement within a single probe, whereas two probe technology is somewhat limited in the range in which it can measure.
•  The probe comes with a protective PVC sleeve that assures durability when taking measurements outdoors.

  Manual Temperature Compensation
•  Since temperature has such a dramatic effect on conductivity readings, having a meter that offers temperature compensated readings is invaluable.
•  The HI8033 allows users to adjust the temperature of the measurement solution through a knob on the face of the meter.
•  The adjustment accounts for the effects of temperature on a sample’s conductivity reading in the range of 0 to 50°C (32 to 122°F).

  One-point Calibration
•  The HI8033 can be calibrated at one point in a standard conductivity solution.
•  The calibration knob located on the face of the meter is easily adjusted to the correct calibration standard.

  Three Measurement Ranges
•  HI8033 offers three conductivity measurement ranges and one TDS measurement range.
•  Each range can be selected by a dial on the face of the meter, allowing users to easily switch between ranges when necessary.
•  The meter is programmed to let the user know when their current reading is out of range, and a new range should then be selected.

   SPECIFICATIONS