HI1135B

Description

The HI1135B is a glass body, refillable, double junction pH electrode with a BNC connector. This electrode has a double ceramic junction in the outer junction and the pH sensing portion is made with high temperature glass. The HI1135B also features a glass side arm construction that allows for a faster flow rate. This design consideration is ideal for applications in which continuous pH monitoring is essential.

•  Calomel References
•  High Temperature (HT) Glass
•  Refillable Electrode

  The HI1135B uses high temperature (HT)glass, spherical bulb, glass body, double ceramic frit, double junction and is refillable through the side arm
construction with 3.5M KCl.
High Temperature Glass Formulation
•  The measurement of pH at very high temperatures is detrimental to the sensitive glass bulb and will shorten the life of it.
•  A pH electrode with general purpose (GP) glass will have a resistance of 100 megaohms at 25^oC while the resistance of HT glass is around 400 megaohms at 25^oC.
•  As the HI1135B is used at elevated temperatures the resistance decreases to approach the that of GP glass.
•  The HI1135B is suitable to use with samples that measure from 0 to 100°C.

  Spherical Bulb
•  The spherical bulb is for general purpose use.
•  Other tip shapes include conic for penetration and flat tip for surface measurements.

  Glass Body
•  The glass body is ideal for laboratory use.
•  The glass is resistant to many harsh chemicals and is easily cleaned.
•  The glass body also allows for a fast transfer of heat to the internal reference electrolyte.
•  The mV generated by the reference cell is temperature dependent.
•  The faster the electrode reaches equilibrium, the steadier the reference potential.

  Double Ceramic Junction
•  The double ceramic junction allows a faster flow rate of electrolyte from the reference into the solution.
•  A standard pH electrode will use a single ceramic junction that allows for 15 to 20 µL/hour of electrolyte to flow; the HI1135B has two ceramic junctions,
providing for 30 to 40 µL/hour of electrolyte to flow.
•  This higher flow rate provides faster electrode response and more stable measurement in viscous solutions or samples of low conductivity, such as pure
water, where a long stabilization time is often observed.

  Side Arm Construction
•  The HI1135B is a refillable probe via the special side arm construction.
•  The side arm allows for continuous filling of the electrolyte solution in applications that require constant monitoring.
•  Since it is a double junction pH electrode the fill solution is the HI7082 3.5M KCl.
•  This solution does not contain any silver as with single junction electrode.
•  The absence of silver will prevent any silver precipitate from forming at the junction surface and clogging it.
•  Clogging of the junction will result in drifty and erratic readings.

  BNC Connector
•  The HI1135B uses a BNC connector.
•  This type of connector is universal in that it can be used on any pH meter that has the female BNC probe input.
•  Other type of connectors include DIN, screw type, T-type, and 3.5mm to name a few.
•  These types of connectors tend to be proprietary for a particular type of meter and are not interchangeable.

     SPECIFICATIONS